Information FAQ's
Do they come painted and assembled?
All of our products are unpainted. The figures are mostly single piece; there are a small number that require minor assembly for example wagons or cannons usually require assembly
These recommendations are for our resin parts only. We cannot guarantee they will work for parts purchased from other vendors.
- Wash all parts with water and liquid detergent (do not soak)
- We not recommend hand soap as some have been identified to have lotions in their ingredients and that will interact with primer and paint.
- Let air dry, away from direct sunlight
- Sand as preferred to remove layer lines and support bumps
- Fill pinholes as needed
- Repeat the wash process
- Primer is recommended
- Use your choice of paint
* If any parts are warped, the hot/cold water trick will help bend back to shape. Attempting to bend back into shape without warm-hot water may cause the parts to snap.
* It’s rare but if parts feel tacky it’s ok. After washing, and only after completely dry, set in the sun for 5-7 minutes.
Feel free to reach out to us if you have any questions.